Quadra-Fire QUADRA-FIRE CONTOUR Stove User Manual


 
October 10, 2001 5 250-5583
Contour Pellet Stove
LISTINGS AND SPECIFICATIONS
The QUADRA-FIRE CONTOUR pellet stove is safety listed
with OMNI-Test Labs, Inc., Beaverton, OR, to ASTM E
1509 and ULC-C1482-M1990 Room Heater Pellet Fuel
Burning type (UM) 84-HUD. Also suitable for use in mobile
homes. See pages 5 and 9 for mobile home installation
details.
HEAT OUTPUT*: 8,000 to 30,000 BTUs per hour
*BTU output will vary, depending on the brand of
fuel you use in your stove. Consult your Quadra-Fire
dealer for best results.
DIMENSIONS
CLEARANCES TO COMBUSTIBLES
A
B
C
D
E
F
C
F
Use a non-combustible floor protector extending under
unit and to the sides, front and back of unit as shown in
Floor Protection Diagram.
Measure front distance (I) from the surface of the glass
door.
*Exceptions: Non-combustible floor protection must
extend beneath the flue pipe when installed with
horizontal venting or under the Top Vent Adapter with
vertical installation.
A Back Wall to Appliance 2"/5cm
B Side Wall to Appliance 6"/15cm
Corner Installation:
C Walls to Appliance 2"/5cm
Vertical 3" - 6" Adapter Kit (Part #812-3570) Installation:
D Back Wall to Appliance Flue 3"/8cm
E Side Wall to Appliance 6"/15cm
Corner Installation with Vertical Adapter Kit:
F Walls to Appliance 2"/5cm
Alcove Installation:
Min. Alcove Height: 43"/1092cm
Min. Alcove Side Wall 6"/15cm
Max. Alcove Depth 36"/91cm
G = 2"/5cm
H = 2"/5cm
*See Exceptions
I = 6"/15cm
G
I
*H
FLOOR PROTECTION
G
10
4-1/8
30-5/8
31-1/2
17-15/16
17-1/16
21-7/16
12-23/32
25-7/16