Filter
Top Products
October 10, 2001 23 250-5583
Contour Pellet Stove
6. Turn the Front Face over so it is face side up. Beginning
with one straight side of trim ring rst, place the studs
on the trim ring into the holes on the Front Face. After
the rst two studs have dropped into their holes, care-
fully lay the trim ring down until all of the studs are in
place. See Fig. 4.
7. While holding the trim ring in place, turn the Front Face
over and lay on protective surface to prevent the trim
ring from getting scratched. See Fig. 5
8. Place nuts on all six studs, and gently snug them
down.
9. To re-assemble, simply reverse steps 1-3.
FIG. 4
FIG. 5
Gold Grille Installation Instructions
Part #811-0830
1. The screws secure the Front Face and Grille to the
Door. When removing the two screws, hold the Door
and Front Face together so that neither will fall causing
potential damage. Save the screws.
2. Install new gold Grille using screws removed in Step
One. Ensure that screws are inserted through the
Grille, Front Face Rib and Door.
KIT CONTENTS: (1) Gold Grille
TOOLS NEEDED: Phillips head screwdriver.
TRIM RING INSTRUCTIONS, CONT'D
Rib
Face
Grille
Door