DV400S DIRECT VENT ROOM HEATER
March 4, 2002 Page 7 30211C
R
839-0710 DV400S, Matte Black, NG
844-0150 Fan Kit, BK95, Var. Speed, Thermostat “ON/OFF”
844-0140 Decorative Glass accent - gold, DT6G
844-7850 Warming Shelf, Matte Black (pr.)
844-7950 Warming Shelf Bracket - w/mitten rod, Black (pr.)
844-7960 Warming Shelf Bracket - w/mitten rod, Gold (pr.)
844-8230 LP Conversion Kit, SPCK400S
844-8240 NG Conversion Kit, SNCK400S
HEATER SYSTEM COMPONENTS
Termination Caps & Snorkels:
991 High Wind Vertical Termination Cap
986 High Wind Horizontal Termination Cap
980 Vertical Termination Cap w/Wind Halo
983 Vertical Termination
984 Horizontal Termination Cap
981 Snorkel Termination (36”)
982 Snorkel Termination (14”)
950 Vinyl Siding Standoff
Flashing:
941 Cathedral Ceiling Support Box
943 Flashing, 0/12 to 6/12 Roof Pitch
943S Flashing, 7/12 to 12/12 Roof Pitch
943F Flashing, Flat Roof
Support Boxes/Thimbles:
940 Round Ceiling Support/
Wall Thimble Cover
941 Cathedral Ceiling Support Box
Pipe:
908 6” Pipe Length, Galv.
908B 6” Pipe Length, Black
907 9” Pipe Length, Galv
907B 9” Pipe Length, Black
906 12” Pipe Length, Galv.
906B 12” Pipe Length, Black
904 24” Pipe Length, Galv.
904B 24” Pipe Length, Black
903 36” Pipe Length, Galv.
903B 36” Pipe Length, Black
902 48” Pipe Length, Galv.
902B 48” Pipe Length, Black
911 11” -14 5/8” Pipe, Adj. Glv.
911B 11” -14 5/8” Pipe, Adj. Blk.
912 12” - 17” Pipe, Adj. Glv.
912B 12” - 17” Pipe, Adj. Blk
990 90° Elbow, Galv.
990B 90° Elbow, Black
Misc.
953 Storm Collar
963 Ceiling Firestop
988 Wall Strap
9546 Attic Insulation Shield
942 Wall Thimble/Cathedral Ceiling Collar
SDV KITS
970A Standard Termination Kit includes
1 each of:“ 990B, 940, & 985
See Note #1 below.
971HW Standard Termination Kit includes
1 each of:“990B, 940, 985, 904B, 911B
973 Vertical Termination Kit includes 1 each
of:“943, 953, 991 (support box NOT included)
Note #1: Straight pipe lenghts are needed to complete installation, the
black 45° elbow is NOT included in kit.
The following venting parts are available from your Dealer:
HHW2 Horizontal High Wind Cap
HHW2K Horizontal Kit includes 90° Black Elbow,
Wall Thimble, 24" Black Pipe, 11" - 14
5/8" Adjustable Vent, HHW2 Termination Cap.
The VTA1, Vertical Termination Adapter Kit, may also be
safely used with this Heater. It is composed of a Vertical
Termination Cap and Cover Plate for existing vertical
chimney.
917 17” -24” Pipe, Adj. Glav.
917B 17” -24” Pipe, Adj.Blk.
945 45° Elbow, Galv.
945B 45° Elbow, Black
SIMPSON DURA-VENT PARTS LIST
Pipe cont'd
SECURITY CHIMNEY'S SECURE VENT CHIMNEY SYSTEM
Your Quadra-Fire DV400S has been approved with Security Chimney's Secure Vent Chimney System. Please
contact your local dealer and they will advise you of the required parts needed for your installation. All the required
certification tests have been successfully completed with OMNI-Test Laboratories, Inc.