Filter
Top Products
Page 11
32198A February 15, 2002 32198A February 15, 2002
Cape Cod Wood Stove
R
The Cape Cod has several options available for installation and appearance. These options are packaged
and sold separately and are listed below.
It is a good idea to plan your installation on paper, using exact measurements for clearances and oor
protection, before actually beginning the installation. If you’re not using an existing chimney, place the stove
where there will be a clear passage for a factory-built listed chimney through the ceiling and roof.
AVOID FIRE: Maintain the designated clearances to combustibles. Insulation must not touch the
chimney. You must maintain the designated air space clearance around the chimney. This space around a
chimney is necessary to allow natural heat removal from the area. Insulation in this space will cause a heat
buildup, which may ignite wood framing. NOTE: Clearances may only be reduced by means approved
by the regulatory authority having jurisdiction.
We also recommend that you have a qualied building inspector and your insurance company representative
review your plans before installation.
ACCESSORIES
831-1700 160 cfm Electric Blower
831-1780 Outside Air Kit
844-7980 Gold Brackets w/mitten rod
844-7970 Black Brackets w/mitten rod
834-3610 Fire Screen (US Installations ONLY)
Warming Shelves
834-3531 Matte Black WS3-2 MBK
834-3551 Porcelain Creme , WS3-2 PCR
834-3561 Porcelain Green, WS3-2 PGR
834-4110 Porcelain Majolica, WS3-2 PMJ
834-4120 Porcelain Blue/Black, WS3-2 PBB
842-3950 Canadian Floor Protector
*Hearth Legs
834-3800 Matte Black, MBK
834-3820 Porcelain Creme, PCR
834-3830 Porcelain Green, PGR
834-4130 Porcelain Majolica, PMJ
834-4140 Porcelain Black/Blue, PBB
*If you install Hearth Legs please note that you can install
an Outside Air Kit or Blower but not both.
Part Number
Description