Filter
Top Products
42 C3468M (4/10)
STAINLESS STEEL
Construction
Back Box 316 stainless steel; gray, polyurethane powder-coated finish
Dome Drive Aluminum, thermoplastic
Lower Dome Trim Ring 316 stainless steel; black, polyurethane powder-coated finish
Bubble Acrylic, clear or smoked
Cable Entry (Back Box) Through 1.5-inch NPT pendant mount
Pan Movement 360° continuous pan rotation
Vertical Tilt Unobstructed +2° to –92°
Manual Pan/Tilt Speeds*
Pan 0.1° to 80°/sec manual operation, 150°/sec turbo
Tilt 0.1° to 40°/sec manual operation
Preset Speeds
Pan 400°/sec
Tilt 200°/sec
Environment Indoor/outdoor
Operating Temperature Assumes no wind chill factor; for detailed test conditions, contact
Pelco
Maximum 140°F (60°C) absolute maximum; 122°F (50°C) sustained
maximum
Minimum –60°F (-51.1°C) absolute minimum; minimal icing at sustained
minimum of –50°F (–45°C); prevents icing at sustained minimum
of –40°F (–40°C); de-ices 0.1 inch (2.5 mm) within 3 hours after
power-up
Weight (approximate)
Back Box 4.75 lb (2.15 kg)
Dome Drive 3.3 lb (1.48 kg)
Lower Dome 1.83 lb (0.83 kg)
*For variable-speed operation, an appropriate controller is required. With fixed-speed controllers,
pan/tilt speed is 20°/sec. The CM6700/CM6800 controller with the KBD200A keyboard has
configurable fixed speeds.
REVISION HISTORY
Manual # Date Comments
C3468M 4/10 Original version.
The materials used in the manufacture of this document and its components are compliant to the requirements of
Directive 2002/95/EC.
This equipment contains electrical or electronic components that must be recycled properly to comply with
Directive 2002/96/EC of the European Union regarding the disposal of waste electrical and electronic equipment
(WEEE). Contact your local dealer for procedures for recycling this equipment.