Filter
Top Products
24 C3468M (4/10)
STAINLESS STEEL
1. Attach the back box leash to the lower dome using the nearest retainer screw (refer to Figure 19).
Figure 19. Attaching the Leash to the Stainless Steel Lower Dome
2. Lightly apply O-ring lubricant (supplied with the lower dome) to the O-ring, and then install the
O ring in the groove on the trim ring of the lower dome (refer to Figure 17 on page 22).
3. Remove the two lower dome mounting screws, and apply a drop of Loctite
®
222MS (supplied with
lower dome) to each screw.
ì
Leash
î
Retainer Screw