Filter
Top Products
20 C3468M (4/10)
HEAVY-DUTY IN-CEILING
1. Snap the clip of the lower trim ring leash into the hole on the lip of the back box (refer to Figure 14).
2. Insert both keys in the barrel locks. Turn the keys clockwise to the unlocked position.
NOTE: Keys cannot be removed from the lock while in the unlocked position.
3. Align the ball studs, located on the mount ring, with the ball stud receivers, located on the inside of
the lower dome. Push the lower dome into the back box.
4. Hold and turn both keys to the locked position.
Figure 14. Installing the Heavy-Duty In-Ceiling Lower Dome
ì
Trim Leash
î
Ball Stud
ï
Ball Stud Receiver
ñ
Barrel Key Lock