Filter
Top Products
Pelco Manual C1968M-A (1/02) 15
Table G. Front Panel Reference Key
Reference
Number Description Function
1 Reset/ALT key
2 Zoom/Freeze key
3 PIP/Sequence key
4 Quad/Menu key
5Power Indicator LED
6 CH1/UP key
7 CH2/Down key
8 CH3/Left key
9 CH4/Right key/VCR
10 Talk/Audio
11 Microphone
12 Tint
13 Sharpness
14 Color
15 Brightness
16 Contrast
17 Volume
18 Power button
Resets alarm or video loss detection. When there is no alarm, use as ALT key to
activate the alternate functions of the Zoom, PIP, Quad, CH4, and Talk keys.
Toggles zoom mode when viewing single camera. In single-camera mode, freezes
display when pressed while the ALT key is held in. In multiple-camera modes,
freezes selected display when pressed while the ALT key is held in and then a
channel key is pressed.
In display mode, shows picture-in picture view. Continuous pressing rotates the full-
screen view. If pressed while the ALT key is held in, starts sequential viewing mode.
In display mode, shows quad view. If pressed while the ALT key is held in, enters
menu/setup mode.
Illuminates when monitor power is on.
In display mode, shows full view of channel 1. In menu mode, moves cursor up or
toggles setting.
In display mode, shows full view of channel 2. In menu mode, moves cursor down or
toggles setting.
In display mode, shows full view of channel 3. In menu mode, moves cursor left or
toggles setting.
In display mode, shows full view of channel 4. In menu mode, moves cursor right or
toggles setting. If pressed while the ALT key is held in, display switches to the VCR
playback mode.
Press to talk switch to activate microphone. Press and hold to talk. Release to listen.
If pressed while the ALT key is held in, moves audio connection to the next channel.
Speak in microphone to talk to people at camera locations.
Adjusts display color phase/flesh tones.
Adjusts display sharpness level.
Adjusts display color saturation level.
Adjusts display brightness.
Adjusts display contrast.
Adjusts loudness of the speaker (effective only when cameras are equipped with
the audio option or when playing back recorded sound from a VCR).
Controls power to monitor only. Power to the cameras and quad circuitry is
controlled only with the switch on the back of the monitor.
Figure 10. Monitor Controls
CH4
VCR
CH3
ZOOM
FREEZE
CH2CH1 MIC
TINT SHARP COLOR BRIGHT
CONTRAST
VOLUME POWER
PIP
SEQ
QUAD
MENU
RESET
ALT
TALK
AUDIO
1 2 3 4 5
6 7 8 9
10 11
12 13 14 15 16 17 18