Filter
Top Products
Pelco Manual C1968M-A (1/02) 13
ALARM
The alarm operates with any or all cameras at once. ALM flashes at the top center of the screen and the display automatically
switches to show the camera that has the alarm.
Table E. Alarm Function
Alarm Function Action
Alarm occurs at a camera location.
Manually acknowledge the alarm.
Alarm is automatically reset
(if the alarm has not been manually
acknowledged).
The condition that caused the alarm
returns to normal.
Manually acknowledge the return
to normal.
Return to normal is automatically
reset (if the alarm has not been
manually acknowledged).
VCR RECORD/VCR PLAYBACK
If a VCR is connected at the Video and Audio jacks (refer to Figures 3 and 4), the image displayed on the screen can be recorded.
To enter the playback mode, hold the ALT button while you press the VCR button; the screen displays VCR playback. Press ALT +
VCR to return to the normal display mode.
Figure 8. Alarm Activities on Screen
RESET
ALT
ALARM CAUSES THE ALARMED
CHANNEL TO SHOW FULL SCREEN,
ALM BLINKS, BEEP SOUNDS (IF ON).
PRESS RESET TO ACKNOWLEDGE
ALARM & STOP BEEP. DISPLAY RETURNS
TO THE ORIGINAL MODE. WHEN THE
ALARM GOES AWAY, THE CYCLE STARTS
OVER.
The display switches to show a full-screen display of the camera that has the alarm
and ALM flashes at the top center of the display. If alarm beep is programmed ON,
the beep sounds for the programmed time period.
Press the RESET button. The display returns to the mode it was in before the alarm
happened. The alarm beep stops. If the alarm condition still exists, ALM appears at
the top of the screen.
If the programmed reset time has passed, the display returns to the mode it was in
before the alarm happened. The alarm beep stops. If the alarm condition still exists,
ALM appears at the top of the screen.
Display switches as described above when an alarm occurs at a camera location.
Press the RESET button. The display returns to the mode it was in before the alarm
returned to normal. The alarm beep stops. ALM disappears from the top of the
screen.
If the programmed reset time has passed, the display returns to the mode it was in
before the alarm returned to normal. The alarm beep stops. ALM disappears from
the top of the screen.