Filter
Top Products
22
1. Parts and their functions
[AUTO] button
This is used to automatically execute transitions (auto
transition) using the transition time which has been set on
the Time menu.
During auto transition its indicator lights in amber.
When the button is pressed again during auto transition,
the auto transition operation is suspended, and the
indicator lights in green. When it is pressed again while
auto transition is suspended, the remaining transition is
executed.
The indicator goes off when auto transition is completed.
When the [AUTO] button is pressed while the fader lever
() is at an interim setting, the transition is executed in the
time remaining from the interim setting.
[CUT] button
This button is used to execute transitions instantly.
Its indicator lights in amber during a transition, and it goes
off when the transition is completed.
[KEY ON] button
This button is used to execute the key transition for the
transition time which has been set on the Time menu.
[FTB ON] button
This button is used to execute fade‑out to a black screen
or fade‑in from a black screen for the transition time which
has been set on the Time menu.
PinP button [PinP1 ON] [PinP2 ON]
This button is used to execute fade‑in or fade‑out of the
picture in picture for the transition time which has been set
on the Time menu.
[DSK ON] button
This button is used to execute fade‑in or fade‑out of
downstream key for the transition time which has been set
on the Time menu.
Wipe direction selection buttons
(WIPE DIRECTION) [N/R], [R]
These buttons are used to select the direction in which to
wipe for executing background transitions.
When the [R] indicator is off:
Wiping proceeds in the normal direction.
When the [R] indicator is lit:
Wiping proceeds in the reverse direction.
When the [N/R] indicator is lit:
The normal direction is replaced with the reverse
direction (or vice versa) when the transition is
completed.
(The lit and extinguished statuses of the [R] button
are also switched in line with the direction of the
wiping.)
Fader lever
This is used to execute background or key transitions.
When it is moved as far as it will go, the transition is
completed. When it has been operated during auto
transition, auto transition will be switched to manual
operation as soon as the fader position overtakes the
amount of the transition being executed.
Bus tally LEDs
These indicate the output statuses of the A bus and B bus.
The LED corresponding to the bus whose program signals
(PGM) are being output lights.