Panasonic 8900 SH Boiler User Manual


 
Series 8900SH Control Panel Operation And Installation Manual
Section 8 Entry Code Details
SECTION 8: ENTRY CODE DETAILS
This section provides more detail to better understand the control panel Entry Codes.
The Keypad is used to (i) provide instructions to the computer (ii) read, via the display LED’s,
what current settings are stored in memory, and (iii) aid in monitoring the system after the
settings are complete.
KEYPAD WITH ENTRY PROCEDURES
1 2 3
4 5 6
7 8 9
0 #
1. Press the appropriate two digit Entry Code.
2. Wait for the Entry Code in the display to begin flashing.
3. Enter the desired temperature, value code, etc.
4. Press the pound sign # to save the displayed entry.
Press the star sign to abort an unwanted entry to prevent it from being saved and to revert
back to the last display code viewed. To discontinue the entry procedure, press the star sign to
start over.
ENTRY CODE 21: OUTSIDE TEMPERATURE SHUTDOWN SETTING
PRESS + = ENTRY CODE
ENTER YOUR CHOICE
PRESS = SAVE KEY
FOR AN OUTSIDE TEMPERATURE SHUTDOWN SETTING OF 60°F.
THE AVAILABLE RANGE IS + 0°F to + 120°F
This code shuts down all boilers when the outside temperature reaches or goes above a
specified point and turns on the boilers when the outside temperature drops below the
specified point. A common setting is around 60°F degrees.
2
1
6
0
#