Configuring the Network / Macintosh / Creating an Ad Hoc Network
Introduction 41
6 After choosing a network name and channel and adjusting
encryption and password options as described below, click
[OK].
• Name: Enter a name of up to 32 characters.
• Channel: Choose a channel.
• Enable encryption (using WEP): Select this option to enable WEP
encryption.
• Password: If WEP encryption is enabled, enter a security key.
The length of the key depends on the option selected for
[WEP key]:
❏ [40-bit (more compatible)]: Enter a five-character ASCII or ten-
digit hexadecimal key.
❏ [128-bit]: Enter a 13-character ASCII or 26-digit
hexadecimal key.
ASCII keys may contain letters, punctuation, and the
numbers 0–9, hexadecimal keys the numbers 0–9 and the
letters a, b, c, d, e, and f.
• WEP key: Choose the length of the WEP key.
Network setup is now complete. Proceed to “Using the WT-4 with
a Computer” (pg. 47), “Uploading Images to an ftp Server” (pg.
107).
