5
Supported Modes
Introduction
A FTP Servers
Servers can be configured using standard ftp services available with
supported operating systems, such as IIS (Internet Information Services).
Connection to computers on other networks via a router, Internet ftp
connections and ftp servers running third-party software are not
supported.
A Ethernet Connection
The camera can not connect to a wireless LAN when an Ethernet cable is
connected. Before connecting to a wireless LAN, turn the WT-4 off and
disconnect the Ethernet cable.
No adjustments to wireless LAN settings are required when the camera is
connected to a LAN by an Ethernet cable.
A Routers
Connection to computers on other networks via a router is not supported.
A Firewall Settings
The WT-4 uses TCP ports 20 and 21 for ftp and TCP port 15740 and UDP
port 5353 when connecting to a computer. Computer firewalls must be
configured to allow access to these ports, as otherwise the computer may
not be able to access the WT-4.
A MAC Address Filtering
If the network using MAC address filtering, the filter must be supplied
with the MAC address of the WT-4. After attaching the WT-4 to the
camera, choose [Device info] > [MAC address] (pg. 172) from the camera
setup menu and note the wireless and Ethernet MAC addresses.