Filter
Top Products
134
Copying Network Profiles to the Camera / Infrastructure Networks
Uploading Images to an ftp Server
9 Enter the following information and click [Next].
• Network name (SSID): Enter a network name or choose from a
list of existing networks. Do not change the name if it is
supplied automatically.
• Communication mode: Select [Infrastructure].
• Authentication: Choose the authentication used on the
network. In infrastructure mode, the camera supports WPA-
PSK, WPA2-PSK, open system, and shared key
authentication.
• Encryption: Choose the encryption used on the network. The
options available depend on the authentication used:
Open: None, 64- or 128-bit WEP Shared: 64- or 128-bit WEP
WPA-PSK: TKIP, AES WPA2-PSK: AES
• Encryption key: If the network uses encryption, enter the
network key. The number of characters required depends
on the type of key used:
• Key Index: If [WEP64] or [WEP128] is selected for [Encryption],
choose a key index (the default index is [1]).
A key index is
not required when [None] is selected.
WEP (64-bit) WEP (128-bit) TKIP, AES
Number of characters (ASCII) 5138–63
Number of characters (hex) 10 26 64