Filter
Top Products
7
Preparing the Camera
Introduction
Preparing the Camera
Before using the WT-4, set the camera [USB] option to [MTP/PTP],
insert a battery in the WT-4, and install the WT-4 Setup Utility and
Thumbnail Selector on the host computer.
Choosing “MTP/PTP”
Before connecting the WT-4, set the camera [USB] option to [MTP/
PTP] as described below. Make sure that the camera battery is fully
charged or the optional AC adapter is connected. See the camera
manual for more information.
1 Turn the camera on.
2 Select the [USB] in the camera setup
menu and choose [MTP/PTP]. See the
camera manual for details.
3 Turn the camera off.
Power switch