Filter
Top Products
Chapter 3 Lookout Runtime Menu Commands
© National Instruments Corporation 3-13 Lookout Operator’s Manual
than can be displayed in the alarms window at once, a scroll bar appears
along the right side of the window.
The following illustration shows an alarms window with Window style set
to Bottom, and Window height set to 4.
Alarms»Filter Options
Security Level: 2
Shortcut Keys: none
Use the A
larms»Filter Options command to filter the alarms displayed in
the alarm window by group, priority, and occurrence.
The following dialog box appears.
To monitor alarms with specific priorities, set the Min and Max values of
the Priority criterion.
Setting User Name restricts your alarm monitoring to alarms generated
while that particular user is logged on. You can only select one user name
at a time, but you can use wild card characters to widen the scope of the
alarms reported.