Filter
Top Products
Chapter 1 Installing Lookout
© National Instruments Corporation 1-7 Lookout Operator’s Manual
Setting System Options
The first time you open Lookout is a good time to set some of the Lookout
system options.
In Lookout, select Options»System from the menu bar. The System
Options dialog box appears as shown in the following illustration.
Figure 1-1.
System Options Dialog Box
Note
Only users logged on with security levels or 9 or greater can access the System
Options dialog box.
Computer Name Setting
The computer name field shows the network name of the computer you are
working on. If this field is blank, and you intend to use the networking
capability of Lookout, you need to check your network settings to make
sure your computer is properly named for network operations.