Filter
Top Products
L NAPCO Security Systems
Freedom F-64 Installation Instructions
WI1501A 9/06
Page 33
Time Selection
The following times are programmable:
Time and Date in Dealer Program Mode
The Touchpad Time and Date may be set in the Easy Menu Driven Program Mode.
Time and Date in User Program Mode
When using a Freedom Touchpad, the Time and Date may be set in the Touchpad Menu Mode, "ACTIVATE PROGRAM Y/N" menu se-
lection (also called "User Program Mode"). See WI1502 for more information regarding Touchpad Menu Mode.
Time and Date Message Option
In the event of a complete power failure (AC and DC) and the loss of the system clock, when the system is re-powered, a message
'SET TIME / DATE" will be displayed on the Freedom Touchpad. The message will remain until the Time and Date have been re-
programmed.
Touch-tone Dialing Only; TouchTone Dialing with Rotary Backup
Select "TouchTone Dialing Only" if the subscriber has TouchTone service. TouchTone dialing is faster than rotary dialing, but not
always as reliable.
For the communicator to use TouchTone on all dial attempts, program TouchTone Dialing Only. To use TouchTone on the first attempt
with subsequent Rotary dial, program TouchTone Dialing with Rotary Backup. TouchTone Dialing Only will override TouchTone
Dialing with Rotary Backup if both are selected. Note that if Backup Reporting is also selected, the communicator will alternate
between TouchTone and rotary dial to reach Telephone 1, then Telephone 2. See Backup Report on Telco 2.
Touchpad/Keypad Area Assignments
In multiple-area systems, each Touchpad/keypad must be individually configured to the correct Touchpad/keypad address number. No
two Touchpads/keypads can possess the same address number. No address numbers can be skipped (they must be contiguous).
Note that each address comprises 2 nibbles; enter the Area Number in the right nibble.
Touchpad Configuration Mode
Provides an exclusive set of menu options used to change the properties of each individual Touchpad to suit each installation. For
dealers and installers only; accessed via a freedom Touchpad.
Touchpad Menu Mode
The Touchpad can provide access to a wide assortment of utility functions, each displayed on the Touchpad LCD window in a prompt-
ing “YES/NO” format. Accessed via a Freedom Touchpad only.
Touchpad/Keypad Panic See Panic Zone
Touchpad/Keypad Tamper See Tamper
Touchpad/Keypad Sounder on Alarm
TIME(1) UNITS MAX. PROG. TIME
PGM2 OUTPUT TIMEOUT MIN. UNTIMED(2)
PGM2 OUTPUT ACCESS CONTROL TIME SEC. 4 MIN., 15 SEC. (255 SEC.)
ALARM OUTPUT MIN. UNTIMED(1)(2)
PULSE-BURG OUTPUT MIN. UNTIMED(1)(2)
PGM1 OUTPUT MIN. UNTIMED(2)
ABORT DELAY SEC. 4 MIN., 15 SEC. (255 SEC.)(3)
CHIME TIME SEC. 63.25 SEC. (255 QTR-SEC.)(3)
AC-FAIL REPORT DELAY 10 MIN. 42 HR., 30 MIN. (2550 MIN.)
EXIT DELAY SEC. 4 MIN., 15 SEC. (255 SEC.)(4)
ENTRY DELAY 1 SEC. 4 MIN., 15 SEC. (255 SEC.)(4)
ENTRY DELAY 2 SEC. 4 MIN., 15 SEC. (255 SEC.)(4)
SENSOR WATCH HRS 254 HRS.
CANCEL WINDOW MIN. 254 MIN.
ZONE INTEGRATION TIME 10 MILLISECONDS 2.55 SEC.
ZONE ANDING TIME SEC. 255 SEC.
Glossary