Filter
Top Products
L NAPCO Security Systems
Freedom F-64 Installation Instructions
WI1501A 9/06
Page 15
Model 368 Cord
TELEPHONE LINES
Connect the Model 368 Cord as follows: 26 (RED = Telco Ring), 27 (GREEN = Telco Tip), 28 (GRAY = Home Ring)
and 29 (BROWN = Home Tip). Insert the modular plug into an approved USOCRJ31X jack (or a CA31A jack for
Canadian installations). The Telco Line is used by the control panel to dial the central station and for downloading.
This line should not be connected to party lines or coin operated telephones. If connected to a line with call waiting,
then call waiting interrupt numbers must be programmed into the CS Telephone Numbers (refer to the F-64
Programming Instructions).
When communicating to central station and during downloading, the control panel seizes the telephone lines from the
house phones, rendering them inoperative during communication. Upon completion of central station
communication, the telephone line is restored to the house phones.
RING TIP TIP RING
TIP
RING
Wiring Connections: Telephone Lines