Filter
Top Products
14
2. Set the item to be prohibited. (The item can be set by simultaneously pressing the switch for the item to be
set while "
" flickers.)
To prohibit ON/OFF : Press the
ON/OFF
switch. The ON/OFF display will change.
To prohibit operation mode changeover : Press the
MODE
switch. The OPERATION CHANGEOVER
display will change.
To prohibit room temperature adjustment : Press the
TEMP.
switch. The ROOM TEMPERATURE
ADJUSTMENT display will change.
3. Input the details of the prohibit setting.
After step 2, light up the items to be prohibited, and then press the
PROHIBIT
switch.
The
PROHIBIT
switch will change from flicker to ON, and the set details will be input.
(5) Input the operation details.
Press the
OPERATION
switch.
The operation details will be input and the operation No. will be incremented by one.
4-4-3. Deleting an operation setting
(1) Select the operation No. to be deleted.
Refer to section 4-4-1 (2) and (3) for the selection methods.
(2) Delete the settings.
Press the
CLEAR
switch twice in succession.
The displayed operation setting details will be deleted. (The default state will be set.)
4-4-4. Copying the details of a pattern setting
• All of the operation details of a set pattern can be copied into another pattern.
(Example: The details set for pattern 1 can be copied to pattern 2. In this case, the contents of
pattern 2 will be overwritten.)
(1) Select the pattern number to be copied, and display in the display section.
(2) Hold down the
DAY PATTERN
switch for two or more seconds. The details set for the copy origin
pattern will be saved.
(The operation time and details display sections will flicker.)
(3) Select the copy destination pattern No., and display in the display section.
(4) Hold down the
DAY
switch for two or more seconds. The setting details saved in step (2) will
be copied to the copy destination.
(The operation time and details display sections will light.)
To cancel copying of the pattern, hold down the
DAY PATTERN
switch for two or more seconds
after step (1) or (3).)
(The operation time and details display sections will turn ON. If the operation is cancelled after
step (3), the pattern No. will return to the copy origin No.)
4-5. WEEKLY PROGRAM SETTING screen
• Set the schedule pattern, set in section 4-3, for each day in each group.
• All of the set schedules are deleted.
The currently selected group No. is lit and
displayed.
The weekly pattern for the currently selected
group will flicker.