Filter
Top Products
37
Configuration
1.CHANNEL - Use [+] and [-] to select a
channel.
2. POPUP ON/OFF - Set up the POPUP
function ON/OFF: Use [+] and [-] to select
ON or OFF. When there is an event, the
screen display will switch to a full screen of
the corresponding channel.
3.EVENT - Use [+] and [-] to select the event
type that will trigger the POPUP:
z A- Alarm
z M- Motion
z AM- Alarm or Motion.
4.DURATION - Use [+] and [-] to set up a
duration of the POPUP. The setting range is
from 1 second to 60 seconds. When the
Event POPUP finishes, 4CH DVR returns to
its Quad screen display, 8CH DVR 9 -Split
screen display, and 16CH DVR 16-Split
screen display.
Buzzer Setup
Set up the condition that triggers the buzzer
to beep. Use [UP] and [DOWN] to select an
item and press ENTER to turn ON or OFF
the selection.
1.ALL - Turn ON or OFF of all the conditions
that trigger the buzzer to beep.
You can also setup the buzzer by the
conditions. Move the cursor to the desired
selection and press ENTER to turn ON or
OFF the selection.
2. KEY BEEP - Turns on/off the beep while
operating the front panel.
3. VIDEO LOSS - Turns on/off the beep at
the video loss.
4. ALARM ACTIVE - Turns on/off the beep
when an alarm is triggered.
5. MOTION DETECT - Turns on/off the beep
when motion is detected.
• When the buzzer is triggered to beep,
press any button on the front panel to
turn off the Beep.
• The beeping can only be turned off
manually. There is no time out setup to
turn off the beeping automatically.
Password Setup
The password consists of 1 to 8 digits. Press
the number keys on the front panel to enter
the password and you can use any
combination of the numbers from 1 to 10.
Default Admin User: Admin / (Blank)
Default Manager: (Manager / 1)
Default Users: (user2~8 / 2~9)
1. USER ID - Press ƒ or “to set User ID.
2. USER PW - Key in the current password.
3.NEW PW - Key in the new password.
4. CONFIRM PW - Enter the new password
again for confirmation.