Filter
Top Products
4
Installation & Service Manual
Please read before proceeding
ƽ WARNING
To minimize the possibility of serious
personal injury, fire, or damage to your
appliance, never violate the following safety
rules:
1. Boilers are heat producing appliances. To
avoid damage or injury, do not store
materials against the appliance or the
vent-air intake system. Use proper care
to avoid unnecessary contact (especially
children) with the appliance and vent-air
intake components.
2. Never cover your appliance, lean
anything against it, store trash or debris
near it, stand on it or in any way block
the flow of fresh air to your appliance.
3. UNDER NO CIRCUMSTANCES must
flammable materials such as gasoline or
paint thinner be used or stored in the
vicinity of this appliance, vent-air intake
system or any location from which fumes
could reach the appliance or vent-air
intake system.
Codes –
The equipment shall be installed in accordance with those
installation regulations in force in the local area where the
installation is to be made. These regulations shall be carefully
followed in all cases. Authorities having jurisdiction shall be
consulted before installations are made. In the absence of such
requirements, the installation shall conform to the latest edition
of the National Fuel Gas Code, ANSI Z223.1. Where required by
the authority having jurisdiction, the installation must conform
to American Society of Mechanical Engineers Safety Code for
Controls and Safety Devices for Automatically Fired Boilers,
ASME CSD-1. All boilers conform to the latest edition of the
ASME Boiler and Pressure Vessel Code, Section IV. Where
required by the authority having jurisdiction, the installation
must comply with the Canadian Association Code, CAN/CGA-
B149.1 and/or B149.2 and/or local codes.
This appliance meets the safe lighting performance criteria with
the gas manifold and control assembly provided as specified in
the ANSI standards for gas-fired appliances, ANSI Z21.13 and
ANSI Z21.10.3.