Manual Buttonhole
(_DStitch width:
(_) Stitch length:
Needle thread tension:
(_ Presser foot B:
3 to 6,.5
Blue zone
2to6
Buttonhole foot
* Manual Buttonhole
:_ If the diameter of the button is more than 1'"(2°5
cm), a buttonhole must be made manually as
follows:
[!] Turn the handwheel toward you to raise the
needle to its highest position. Raise the presser
foot Jiftero
[] Set the stitch at " _1" by turning the stitch
selector,
:_" If the stitch is already at " U ", reset the
machine in accordance with the instructions on
page 76,
Attach the buttonhole foot (B)_
PuJl the buttonhole lever downward as far as it
will go.
[] Lower the needle into the garment where the
buttonhole is to start, and lower the foot..
[] Sew the front bartack and left row, then stop the
machine after sewing the desired total length of
buttonhole.=
[] Pull the buttonhole lever toward you..
[] Sew the back bartack and right row, then stop
the machine at the starting point.
_' To cut the opening and to reset for sewing the
next buttonhole, refer to the instructions on page
76.
f
f
%%
_ WIDTH
_ LENGTH
®
(b
®
J
J
J
82