Filter
Top Products
Pressure Adjusting Lever
_ Pressure adjusting lever
The pressure adjusting lever should be set at "3" for
regular sewing_
Reduce pressure to "2" for applique, cut work, draw
work and basting°
Set pressure at "1" when sewing chiffon, lace,
organdy and other fine fabrics.. Velour and knits with
a tot of stretch may also require pressure at "1 ".
Presser Foot Lifter
C) Presser foot lifter
(_ Normal up position
(_ Highest position
The presser foot lifter raises and lowers your presser
foot.
You can raise it about 1/4"( 0.6 cm ) higher than the
normal up position for easy removal of the presser
foot or to help you place heavy fabric under the foot.
Thread Cutter
(_ Thread cutter
You do not need a pair of scissors to cut threads
after sewing. Just use the built-in thread cutter,
/
Extension Table
Detaching the table :
Pull the table away from the machine, as illustrated°
Attaching the table:
Push the extension table until it snaps into the
machine,
(_ Extension table
(_) Projection
(_ Hole
Accessory Box :
Open the cover of the accessory box toward you,,
Sewing accessories are conveniently located in the box.
\