Kenmore 385. 17630 Sewing Machine User Manual


 
Topstitching
C) Stitch width:
(_ Stitch length:
_) Needle thread tension:
(_ Presser foot A:
(_ Presser foot H:
&5
Red zone
2to6
Zigzag foot (.!, _i, 4_),
Straight stitch foot ( ,i, only)
NOTE:
When using the straight stitch foot, make sure to set
the stitch width control at Q Otherwise the needle
may strike the presser foot and possibly break.
Topstitching emphasizes lines of garments and
keeps seams and edges flat and crisp. Accent suits
or blouses with one or two rows of topstitching
around the outer edges of cuffs, lapels or collars.
Lower the presser foot and keep the edge of the
fabric next to the right edge of the presser foot°
Evenly guide the fabric along the edge to produce an
even row of topstitching 3/d" (lcm) from the edge..
I 1 I
f t i
1 I 1
_WIDTH
(_ LENGTH
0 ®
or
®
Quilting
C) Stitch width:
(_) Stitch length:
(_) Needle thread tension:
(_) Presser foot A:
(_ Presser foot H:
6.5
Red zone
2to6
i t I
" I I i
Zazaclfoot( , , ,)
Straight stitch foot ( ,i,only)
NOTE:
When using the straight stitch foot, make sure to set
the stitch width control at 04 Otherwise the needle
may strike the presser foot and possibly break.
The quilter will help to keep the stitching lines straight.
[] Loosen the quilter holding screw.
Slide the quilter in the hole to the desired width
and tighten the screw.
[_ Sew, guiding the quilter over the previous row of
stitching°
C) Quilter holding screw
(_ Quilter
Hole
(_ Distance
t l f WIDTH
I I I
,13 (1) Cl;
_ LENGTH
®
or
®
[]
[]
4O