Filter
Top Products
o Corded Buttonhole
Use the same procedure as automatic buttonhole,,
'_"Set the stitch width to match the thickness of the
cord used°
With the buttonhole foot raised, hook the filler
cord on the spur at the back of the buttonhole foot.
Bring the ends toward you under the buttonhole
foot, clearing the front end..
Hook the filler cord into the forks on the front of the
automatic buttonhole foot R to hold them tight.
Lower the needle into the garment where the
buttonhole will start and lower the fool
(!) Spur
Depress the foot control gently and sew the
buttonhole.. Each side of the buttonhole and the
bartacks will be sewn over the cord.
Remove the fabric from the machine and cut the
sewing threads only..
(_) Needle thread
(_ Bobbin thread
Pull the left end of the filler cord to tighten iL
Thread the end through a darning needle, draw to the
wrong side of the fabric and cut.
:1,To cut the buttonhole opening, refer to the
instructions on page 76,.
8O