Filter
Top Products
Oil the Underside
Oil the Face Cover Plate
Fig. 1
1,
2.
3,
NOTE :
Fig. 2
Tilt the machine head back.
Remove the bottom covers by loosening the two screws, A and B, under
the free arm. !Fig, 1)
Oil at the arrows shown in the illustration. (Fig. 2)
No other oiiing ts required,
1. Oil at those points indicated by short arrows tn the illustration above.
No other oiling Is required.
DO NOT REMOVE the top cover or base cover. No customer service is
required in these areas.
92