Filter
Top Products
Prepare Your Top Thread
= Check Your Presser Foot
Your presser foot ts held in place by a Foot Holder. Each presser foot merely
snaps on the foot holder, which _sseldom removed.
If you need to remove or attach the foot holder, here is what you do:
To Remove:
f
To Remove:
Turn the screw toward the back of the
machine. Use the large screw driver.
To Attach:
Presser bar _f-_')_'l
To Attach:
1. Match the hole in the foot holder
with the threaded hole in the
presser bar.
2. Fit the foot holder screw into the
hole.
3. Tighten the screw by turning it
toward you.
22