Filter
Top Products
Buttonholes _ _ _ (Continued)
tf,o°o°.,o.,°
!1
J
Here's How
NOTE: Before you sew buttonholes on the actual garment, make several
practice buttonholes. Be sure to duplicate exactly:
the fabric
-- the seam conditions (folds, interfacing, topstitchmg, etm)
the buttonhole position on the garment
For Keyhole Buttonholes: Be sure the hole portion of the keyhole faces the
edge of the garment.
t. Be sure your sewing surface is flat to prevent the fabric pulling against
the fabric feed.
NOTE :
Fabric pulled tight by tts own weight (falling over the edges of the
sewing surface) witl be too tight and distort the automatic fabric
feed. The buttonhole length and shape may change slightly from
one buttonhole to another.
a. Attach the extension table.
b. If your machine is mounted in a cabinet, be sure the machine
is tn the flat-bed position.
c. If your machine is on a table, be sure to support the fabric
around the edges of the sewing machine surface.
66
2. Place the button on the fabric sample and mark the top and bottom to
determine the buttonhole length.
NOTE:
If the fabric is thick near the seam and your buttonholes, the
length and shape of your buttonholes may vary. Try one or more
of the fol!owing adjustments in order:
a. Change to the B Foot.
b. Start your buttonhole so that you sew towards the edge of
the fabric, mstead of away from it.
c. Put standard writing paper (see illustration) (not tissue paper)
under the buttonhole area next to the feed dogs, as you sew
the buttonhole (for woven and stretch fabrics).
d. Sew each buttonhole individually.
Do not use the Memory functlon.