Filter
Top Products
= Adjust the Presser Foot Lever
J
The Presser Foot Lever raises and lowers your
presser foot.
You can ratse it about 1/4" higher for easy removal
of the presser foot or to help you place heavy
tabncs under the presser foot.
o
f
Thread Cutter
cutter
You don't need a scissors to cut the thread after you finish sewing. Just use the handy thread
cutter on the back of the Presser Bar above the presser foot holder.
1. Puli thread through the groove untiI it is taut.
2, Then pull the thread sharply down and back to cut it.