Filter
Top Products
Prepare Your Top Thread (Continued)
, Thread Your Needle
NOTE: The numbered steps below toilow the numbers on the illustrations.
NOTE: Dotted lines show places where the thread loops and then ts pulled tight. Each piace has a spring.
1. Ho[d the thread, as shown,
down until it clicks and comes down under the
hook in the top cover thread guide.
2. Draw the thread around the thread guide and
down into the tension area.
,
Press the thread 5,
Pull the thread up from teft to right around the
check spring wire.
4,
Draw the thread straight up and from left to
right through the slot and into the eye of the
take-up lever.
6.
7.
. ® .
Draw the thread down and slip it through the
right side of the right-hand thread guide, as
shown.
Pull the thread to the left and slip it through
the left thread guide,
Slide the thread through the needle bar guide
on the left.
8. Thread the needle from front to back.
NOTE: You may want to cut the end of the
thread with sharp scissors for easier
needle threading.
@
24