Filter
Top Products
EN 33
REC MODE
WIDE MODE OFF
AGC
40X
SP
ZOOM
DIS
GAIN UP
TO DATE / TIME MENU
TO SYSTEM MENU
4
END
OFF
REC MODE
WIDE MODE OFF
AGC
40X
SP
ZOOM
DIS
GAIN UP
TO DATE / TIME MENU
TO SYSTEM MENU
4
END
OFF
A
M
5S
OFF
P
L
A
Y
Menus
The Recording Menu allows you to set these functions:
Recording Mode, Wide Mode, Zoom Magnification, Digital Image Stabilizer, Gain Up, Date/Time Menu,
System Menu
. The following selection procedure applies to
Recording Mode, Wide Mode, Zoom Magnifica-
tion, Stabilization and
Gain Up
.
Please refer to pages 34, 35 for details.
1
SELECT OPERATION MODE
First turn the Power Dial to “
M
”, “5S” or “ ”
while pressing down the lock button located
on the dial, make sure the LCD monitor is
open fully or the viewfinder is pulled out.
2
ACCESS RECORDING MENU
Press MENU. The Recording Menu appears.
3
SELECT FUNCTION
Move the pointer and highlight bar to the
desired function by rotating the Select Dial,
then press it. The pointer stops blinking,
indicating that the function has been selected.
Display
Recording Menu
4
SET FUNCTION PARAMETERS
Cycle the available settings of the selected
function by rotating the Select Dial. Stop when
the one you need is displayed. Then press it,
the pointer and highlight bar automatically
move to “END”.
•To set the parameters for a different function,
repeat steps 3 and 4.
5
CLOSE RECORDING MENU
Press the Select Dial. Selection is complete and
the menu disappears.
MENU button
Power Dial
Lock button
Select Dial