Filter
Top Products
10 EN
Charging The Battery Pack
You can charge one battery pack at a time, or two consecutively.
GETTING STARTED
ATTACH
NOTES:
●
If you connect the camcorder’s DC cord to the
adapter during battery charging, power is
supplied to the camcorder and charging stops.
●
When using the AC Power Adapter/Charger, be
sure to use the supplied power cord only.
●
The AC Power Adapter/Charger is for use with the
BN-V814U Battery Pack only.
●
When charging the Battery Pack for the first time
or after a long storage period, the Charger
Indicator may not light. In this case, remove the
Battery Pack from the AC Power Adapter/Charger,
then try charging again.
●
Since the AC Power Adapter/Charger processes
electricity internally, it becomes warm during use.
Be sure to use it only in well-ventilated areas.
●
If the battery operation time remains extremely
short even after having been fully charged, the
battery is worn out and needs to be replaced.
Please purchase a new one.
To AC outlet
Power cord
Charger indicator 2
Power lamp
Charger
indicator 1
DETACH
1
SUPPLY POWER TO CHARGER
Plug the AC Adapter/Charger’s power cord in
to an AC outlet. The power lamp comes on.
2
ATTACH BATTERY/BATTERIES
Attach while making sure the marks are
facing down and aligned with the correspond-
ing marks on the AC Power Adapter/Charger.
•The Charger Indicator (1 or 2) begins blinking to
indicate charging has started.
3
CONFIRM STATUS
When the charger indicator stops blinking but
stays lit, charging is finished.
•If two batteries are attached to the charger, they
will be charged in the order that they were
attached.
4
DETACH BATTERY/BATTERIES
Slide the battery or batteries in the direction of
the arrow and lift off.
•Remember to unplug the AC Adapter/Charger’s
power cord from an AC outlet.
Battery pack BN-V814U
AC Power
Adapter/Charger
AA-V80U
BATTERY ONE TWO
BN-V814U Approx. 110 min. Approx. 220 min.
DC OUT jack
Power cord
CHARGING TIME