JVC GR-DVL9000 Furnace User Manual


 
EN 25
Interface Shooting
The person you are shooting can view himself/
herself in the LCD monitor, and you can even shoot
yourself while viewing your own image in the LCD
monitor.
1
TILT LCD MONITOR UPWARD
Open the LCD monitor and tilt it upward to
180 degrees so that it faces forward.
2
START RECORDING
Point the lens towards the subject (yourself
when self-recording) and start shooting.
•During Interface Shooting, the “Tape Running”
indicator and warning indications ( pg. 83)
are the only ones that are shown; they appear
reversed in the display as they would when
viewing a mirror, but are not reversed in the
recording.
NOTE:
The tape remaining indicator does not appear
during interface shooting. However, when the
remaining time reaches 2 minutes, the indicator
appears showing the remaining time:
– – –
(blinking)
– –
(blinking)
(blinking)
Journalistic shooting
In some situations different angles of shooting may
be required for more dramatic results.
1
OPEN LCD MONITOR
Make sure the viewfinder is pushed back and
the LCD monitor is fully open (approx. 90°).
2
TILT LCD MONITOR
Tilt the LCD monitor in the most convenient
direction.
•The LCD monitor can rotate almost full circle
(270°: 90° downward, 180° upward).
Self-recording