Filter
Top Products
47
Pintucking
1 Stitch pattern: 02
2 Presser foot: Blind hem stitch foot G
[1] Attach the blind hem stitch foot.
Place the folded fabric under the presser foot.
Position the needle 0.1 to 0.2 cm (1/16”) inside
from the folded edge by turning the handwheel and
lower the presser foot.
Feed the folded edge smoothly against the sliding
guide.
[2] After sewing is finished, use an iron to make
pleats.
Quilting
1 Stitch pattern: 01
2 Presser foot: Foot A
3 Quilting bar L
Loosen the set screw on the back of the presser foot
as shown, sliding the quilting bar into the opening
under the screw to the width between lines of quilting
stitches you desire.
Tighten the screw.
Sew other rows, guiding the quilting bar over the
previous row of stitching.
1 Set screw
2 Quilting bar
3 Setting hole
4 Stitch interval
[1]
[2]
1
2
12
3
1
3
2
4