Filter
Top Products
/I
L-I
ROI
Note: The
white
switch look above the ON/OFF switch, on
th8
upper handle,
holds the switch in the Off position and aids in proper assembly of your
cleaner. Assembly can be continued if the switch lock is missing. However, do
not remove the switch lock until assembly is completed.
Place upper and lower handle sections on a flat surface, aligning rod sections.
Push sections together firmly until they *click” and rod sections lock together.
m.
1)
l
Re carefui not to press against the gray rod extending from the
lower handle. (Fig. 2)
HANDLE
Insert large rectangular end of
cord into pocket in bottom of handle, with side
marked “UP” visible. (Fig. 2) Make sure rectangular end is pushed into the
handle as far as possible.
Slide
cord protector toward upper handle. (Fig. 2)
4