Filter
Top Products
The headlight
What to buy
This cleaner uses a
12
volt, wedge
base type 912 bulb, Hoover part
No.
27313-105.
How to replace
Disconnect
ckaner
from eiectri-
cai outlet and detach hose from
cieaner.
1. Remove nozzle control knob on
front of hood by grasping knob and
pulling up.
2. Place handle in operating
position and turn cleaner over.
Insert end of flat screwdriver into
one of the four slots beside an
arrow on bottom of cleaner.
3. Pry outward to release latch.
Repeat to release latches at the
remaining three arrows.
4. Turn cleaner over and lift off
hood.
20