Filter
Top Products
5. Remove bulb by pulling straight
out of socket; push new bulb into
socket until it locks in place.
6. Place hood on cleaner body and
press firmly to snap all four latches.
Pull up on hood slightly to make
sure all four latches are secured.
Push nozzle control knob back onto
front of cleaner.
The belt
The belt on your HOOVER cleaner causes the agitator to rotate and is impor-
tant for the effective operation of the cleaner. The belt is located under the
bottom plate of the cleaner and should be checked from time to time to be sure
it is in good condition.
When to replace
To check belt, remove bottom plate as shown on the following page under
“How to replace.”
Replace belt if it is stretched, cut or broken.
What to buy
One extra belt has been provided with your cleaner.
To assure effective operation, use only genuine HOOVER belts with your
cleaner. When purchasing a new belt, ask for Hoover part No. 38528427.
21