Filter
Top Products
Agitator brush
rolI
When to replace
Disconnect cleaner from eiectri-
cal
outiet and detach hose from
cleaner.
When agitator brushes are worn, the
brush roll should be replaced.
To check condition of brushes,
move edge of card across bottom
plate while turning agitator. To
maintain cleaning effectiveness,
replace brush roll if brushes do not
touch card.
What to buy
The brush roll may be replaced with
either a single or double brush roll.
Single row of brushes
-
Hoover part No.
48414-033.
Double row of brushes
-
Hoover part No.
48414432
How to replace
Disconnect
cleaner
from
ekctri-
cai outiet and detach hose from
cleaner.
1. Remove bottom plate as de-
scribed in ‘The belt. section.
Remove agitator from cleaner.
2. Turn end plates of agitator in
opposite directions until one end
plate comes off.
24