Filter
Top Products
t
NOZZLE
’
I
NOZZLE CONTROL
KNOB
I
Carpet height
adjustment
The cleaning of carpet and rugs
takes place at the nozzle.
If it is necessary to raise and lower
the nozzle for various carpet pile
heights, slide the nozzle control
knob to the correct setting.
For ease in sliding knob, the handle
should be in the upright position.
The nozzle will not move into the
adjusted position until the cleaner
handle is lowered to the operating
position.
When using hose and tools, slide
knob to the Cleaning Tools
setting. Return knob to the correct
setting when cleaning floors. Do
not leave knob in Cleaning Tools
setting when cleaning floors.
Leave hose attached to cleaner and
place other end firmly into tool rack
for peak performance when
cleaning carpets.
For maximum cleaning performance the following carpet height settings
are recommended.
l
Setting 1:
for low pile, level loop, kitchen type carpet.
l
Setting 2:
for other types of carpet.
l
Higher Settings:*
for very deep pile carpet where
easier pushing effort is desired, while
maintaining good cleaning performance.
l
Setting 5:
for hose and cleaning tool use only.
*Note: If the cleaner is difficult to push, slide the knob to the next higher
setting.
14