Filter
Top Products
With cord hooks to back, place
assembled handle onto handle
base of cleaner body. (Fig. 17)
Rock handle
side
to side while
pushing down firmly. Extra
pushing effort may be required.
Press the handle release lever to
move handle to the operating or
middle position.
Push bolt into hole on lower front of
handle. (Fig. 18)
If bolt will not go through hole
essily
the bracket Is not locked
and/or handle is not pushed down
completely.
Place nut in recessed area at back
of handle. Hold nut in place while
tightening bolt securely with a
screw driver. (Fig. 19)
Only one nut is needed on this
,model.
The extra nut is not required
but has been provided for your
convenience.