Filter
Top Products
5. Slip agitator through new belt
(with
iettering
toward outside of
cleaner). Lower end of belt into
opening in cleaner body; reposition
agitator.
6. Place the three tabs on bottom
plate into slots in front of cleaner
body. Snap bottom plate into place
over agitator.
7. Turn cleaner over and stretch
new belt onto motor pulley.
Extra effort may be required to
stretch
beit
onto pulley.
Turn agitator, making sure belt is
not pinched between agitator and
cleaner body. The belt must rotate
freely inside the belt guide. If
agitator does not turn, remove
bottom plate and reposition belt in
belt guide.
8. Replace hood and nozzle control
knob.
23