Filter
Top Products
Clearing obstructions
To check for obstructions, first turn
cleaner off and disconnect from
electrical
outlet;
then
disconnsct
hose from cleaner. Open hose
door and carefully remove any
visible obstruction. If no obstruction
is found, check hose and tools.
Remove obstruction. To continue
using tools, reattach hose to
cleaner. If no obstruction is found
and a problem persists, contact
your Hoover Factory Service Center
or Authorized Warranty Service
Dealer (Depot).
How to clean tools
To clean the hose, wipe off dirt with a cloth dampened in a liquid
detergent. Rinse with a damp cloth. Cleaning tools may be washed in warm
water with a detergent. Rinse and air dry before using.
How to attach tool
cover
The tool cover is designed with a
‘break-away” feature which allows it
to snap off if it is pushed open too
far. To reattach, align hinges of
cover with slots on side of tool rack.
Press cover back into place.
Maintenance
The following sections are concerned with proper maintenance of the cleaner.
Familiarize yourself with these home maintenance tasks and keep this owner’s
manual in a convenient place where you can refer to it when needed. Proper
use and care of your cleaner will ensure continued cleaning effectiveness.
The bag
When to replace
Check bag from time to time.
It is recommended that you change the bag
when dirt reaches the dotted line. If more dirt than this accumulates, your
cleaner may not operate effectively.
CAUTION: Very fine materials, such as face powder, cornstarch, fireplace
ashes or fireplace soot, may
seai
the paper bag and may cause it to burst
even though it is only partially full of dirt. When cleaner is used to remove
material of this nature, change bag often.
18