Filter
Top Products
CHAPTER 5
Maintenance and Troubleshooting
SHOWGUN
®
User Manual 39
The SHOWGUN fixture uses a proprietary 2000 watt short arc metal halide lamp with a fast fit
base.
DANGER-INTENSE HEAT:
Equipment surfaces may reach temperatures up to 150° C (302° F).
Allow the fixture to cool before handling.
To change the lamp:
2. Rotate the lamp base to
align with the slots in the
housing and pull out of the
fixture.
Replace with a PHILIPS
MSR Gold SA/SE only (HES
part # 55030084)
3. Use the three Phillips head
screws for lamp
optimization.
1. Loosen the two captive
screws open the lamp panel
to access the base of the
lamp.