Filter
Top Products
CHAPTER 3
SHOWGUN® Menu System
26 SHOWGUN
®
User Manual
Temperatures Menu
The SHOWGUN fixture contains temperature sensors that track current, maximum and minimum
temperatures produced in the unit. Sensors monitor the air temperature of the electronics
housing, the lamp housing, and the LED System.
Initially, the setting for current, maximum and minimum temperatures are equal. As the sensor
detects temperature changes, the fixture adjusts the minimum and maximum settings.
To view maximum temperature the LED System reached since the last reset:
1. Press the Menu button to unlock the menu system or to move back up the system to the top
level menus.
2. Use the left and right arrows on the Center button to scroll to the INFORMATION MENU and press
the Enter button to select.
3. Use the left and right arrows on the Center button to scroll to the TEMPERATURES MENU and
press the Enter button to select.
4. Use the left and right arrows on the Center button to scroll to MAXIMUM. Press the Enter
button to select.
5. Use the up and down arrows on the Center button to scroll to LED TRACKING. Press the Enter
button to select and view the temperature recorded in degrees centigrade.
To reset all the temperature readings back to the current temperature:
1. Press the Menu button to unlock the menu system or to move back up the system to the top
level menus.
2. Use the left and right arrows on the Center button to scroll to the INFORMATION MENU and press
the Enter button to select.
3. Use the left and right arrows on the Center button to scroll to the TEMPERATURES MENU and
press the Enter button to select.
4. Use the left and right arrows on the Center button to scroll to RESET TEMPERATURE. Press the
Enter button to select. The display will read NO. Use the up and down arrow to scroll to YES
and hold for 5 seconds to reset all sensors to the current temperature in centigrade.
Fixture Hours
Use this option to view the fixture operation time in hours and minutes.