20
TROUBLE SHOOTING
PROBLEM CAUSE CORRECTION
Error Code 101
until display is blank
or until display is blank.
Error Code 102
Error Code 103
position
Error Code 104
timed out trying to reach home position
motor wires broken or disconnected, necessary
D3. Drive gear label dirty or damaged, D3. Replace or clean drive gear
missing or broken gear
D4. Drive bracket incorrectly aligned to D4. Reseat drive bracket
back plate
drive bracket drive bracket
Error Code 106
programmed to use MAV
2. Control valve stalled in regeneration A. Motor not operating A. Replace Motor
5.
when battery is depleted.
up to 2 hours. Power outage > 2 hours.
above water level.
blockage.
highest known hardness.