Hellenbrand H-150 Series Water System User Manual


  Open as PDF
of 40
 
17
STEP 1 CS – 
-
pear in 5 seconds the lock on the valve is activated.
STEP 2 CS – Meter Size. Use the or 


STEP 3CS – Use the or 




• Factory Setting is OFF

to a MAV is made to the two-pin connector labeled drive on PC board.
STEP 4CS – Use the or 

brine tank.

STEP 5CS –  the or buttons



Step 1CS
CYCLE SEQUENCE
Anytime cycle sequence is modied, softener set-up will revert to
manufacturer setting and must be reprogrammed as desired.


the cycles will last. The operator may choose up to 9 cycles in any order.


Cycle Options





Step 2CS
1.5
SET
Step 3CS
OFF
AUX VALVE CONTROL
SET

DRAW
REGENERANT
DRAW-DN
30:00
RECLAIM START
SET
MIN
8:00
RECLAIM DURATION
SET
MIN
Step 5CS
ENABLED
RECLAMATION MODE
SET
Step 4CS
 previous next