21
CAUTION! Risk of Cuts/Abrasions. Wear protective
gloves and safety glasses during installation. Sheet metal
edges are sharp.
• Location of chimney air kit
• Location(s) of outside air kits
• Electrical connections and/or wall switch
• Gas line piping
• Remove back refractory from outside of replace by
bending tabs up and lifting refractory out of brackets.
See Figure 7.1.
• Bend tabs back down out of the way. See Figure 7.2.
• Do not remove screws or refractory brackets from
replace. If refractory brackets must be removed, ll
holes in outer shell with screws.
• Repeat this process to remove side refractories.
• Remove hearth stone by removing three corrugated
shipping spacers (Figure 7.4). Lift hearth stone out of
replace. See Figure 7.5.
• Remove screens by removing screw from end of each
screen rod.
• Remove replace from pallet:
- Remove screws from shipping brackets and pallet
(Figure 7.6),
- Replace screws removed from replace.
- Brackets can be used to anchor fireplace in
position.
Heat & Glo • EXCLAIM-50 • 4013-041 • Rev AA • 7/12