Filter
Top Products
39
Heat & Glo • Escape-I35-C, Escape-I30-C • 2201-901 Rev. H • 5/12
2202-935D
Figure 8. Place Log #5
Figure 9. Place Log #6
Log #5 (SRV2202-705): See Figures 2 and 3 for additional references. Place the thick end of Log #5 on the fl at spot of
Log #1. Locate the groove on the thin end of the log. Mate the groove with the grate bar as shown above. Center the tip
of Log #5 between the ends of Log #3 and Log #4.
5
6
PLACE LOG
PLACE LOG
ON FLAT SPOT
ON FLAT SPOT
FLAT SPOTS
FLAT SPOTS
FOR LOG #6
FOR LOG #6
PLACE LOG
PLACE LOG
ON FLAT SPOT
ON FLAT SPOT
PLACE LOG
PLACE LOG
ON FLAT SPOT
ON FLAT SPOT
Log #6 (SRV2202-706): See Figures 2 and 8 for additional references. Place the thick end of the log on the fl at spot of Log
#2. Place the thin end of Log #6 on the fl at spot of Log #5 as shown in Figure 9.
GROOVE MATES
GROOVE MATES
WITH GRATE BAR
WITH GRATE BAR
CENTER
CENTER
BETWEEN
BETWEEN
LOG #3 AND
LOG #3 AND
LOG #4
LOG #4