Hearth and Home Technologies NorthStar-NT Indoor Fireplace User Manual


  Open as PDF
of 72
 
September 1, 2008
September 1, 2008
Heat & Glo • NorthStar EPA Fireplace • 480-1081C
Page 37
Item Description Qty
1 Screw8-32x1/2PHPHLTC 2
2 Screw6-32x1/4PHPHLTC 2
3 Washer SAE #10 2
4 Bushing 2
5 Linkage Control Arm 1
3. Place linkage control arm over timer shaft and tighten
set screw. Figure 37.1.
4. Rotate linkage control arm into nal position and re-
attach to mounting plate. Note that the D cut is now
facing the linkage timer arm. Re-attach the linkage timer
arm. Figure 37.2.
Item Description Qty
6 Attachment Nut & Set Screw 1
7 Linkage Timer Arm 1
8 Door Linkage 1
9 Timer,Mechanical,12hours 1
10 MountingBracket 1
Tighten set screw
Attach to
Mounting
Plate
Attach Linkage
Timer Arm
“D” cut is not facing the Linkage Arm
Figure 37.1
Figure 37.2
Figure 37.3 Exploded View of Entire Assembly for Point of Reference only
 previous next